The Explorer Power System


With Enerdrive breaking into the 4WD canopy market in recent years, we have been consistently asked by manufacturers and end users to come up with a compact power solution to operate all of the electrical equipment that is ending up in the back of these canopies. From a simple system to operate a fridge and a couple of lights to a full-on power station, these are the type of systems we have been asked for.

After many brainstorming sessions and 3D modelling designs, Enerdrive has produced 3 models to cover just about any customer request for power in their canopies.

The Explorer:

This system is designed for the end user only, requiring a minimum power option in a neat package. Available in 3 different versions;

  1. K-EXPLORER-01 inc ePRO PLUS Battery Monitor

  2. K-EXPLORER-02 inc Simarine Battery Monitoring

  3. K-EXPLORER-03 inc Simarine & Individual Load Monitoring

The Explorer 01, for example, consists of the following items.

  • Enerdrive ePOWER DC2DC40+ Vehicle/Solar Charger

  • 1 x ePRO Plus Battery Monitor

  • 4x Pre-wired Circuit Breakers for main power equipment

  • 4 x Contura switches for Lights & Auxiliary loads

  • Pre-wired Battery & Fridge Anderson Plugs (50A Fridge & 175A Battery)

  • 1 x 12v CIG & 1 x Dual 2.4A USB sockets come standard. You can choose a mixture of Twin USB 2.4A Hi Amp sockets to charge your mobile devices or mix it up with 2 x 12v Output Socket. The choice is yours at the time of order.

  • Battery Reset button for kickstarting your flat battery from the DC2DC Charger

All Explorer systems are pre-wired by Enerdrive, so the only cabling required at installation time is load outputs, battery connection & vehicle/solar/tank inputs.

All systems are built into a unique compact box arrangement and designed to mount, for example, on the front or rear bulkhead of a vehicle's canopy. The systems are available in either the Left (passenger side) or Right (driver's side) installation. Any brand of battery is suitable from Wet Sealed, AGM, Gel and Lithium.

If you are interested in having custom engraving for switch/circuit breakers to your specific requirements, this option is available at an additional cost.

Enerdrive is proud to bring to the market this innovative design that the manufacturer or end user can install in a neat one-piece installation.


This product has been added to your cart